Try our Sandstone Restoration, Installation and Stone Carving Service in Melbourne and Sydney

After many years of specialising in Stone Masonry and Repair, melbournebrickrepair.com can service your Sandstone like few others.

melbourne-sandstone-repair-clean-restoration

Repointing, Carving (Banker Work), Specialised Indents and Facade Restoration is somewhat of a rarity. We want that to be no longer the case.

Are you a builder or contractor and need heritage stone consultation? We can help show you the traditional methods of stone carving, indents, design traditional mortar mixes via agreement.

via Sandstone Restoration and Repair

A New Brick System : STONE BRICK™ Architectural Cladding System

Instead of reinventing the wheel, we have revived an old design and added to it.

Bluestone, also known as Basalt, is an extremely versatile construction material. Traditionally, it has been utilised as a paving material and also extensively in aggregate form contained in modern concrete mixes.

Knowing that Basalt has more to offer than just being used as an aggregate, the STONE BRICK™ Architectural Cladding System will impress even the most avid critic .

See product at Mason & Maker, or the below product doc/pdf  for further information

STONE BRICK™ Architectural Structural Masonry System  (doc)

STONE-BRICK-Architectural-Masonry-Cladding-System (pdf)

 

stone-brick-masonry-cladding-system

Need Crack Stitching for Brick Repair? MelbourneBrickRepair.com

Is your house cracking up? Made it through winter and now you want to get the house airtight and weatherproof? You may need crack injection and/ or brick stitching.

cracked-brick-mitre-corner-caulfield

Cracking at mitre corners is very common in masonry. Fix it with brick stitching.

First, the mortar material in between the bricks should be removed. This will provide longer serving results for the repair. Next, the joints are lined with the steel reinforcement. These elements are either galvanised or stainless steel.

crack-repair-melbourne-brick-stitching

The stitches are installed as regularly as required.

With the brick stitches in, next is the final tamp point.

brick-stitch-repair-melbourne-crack-fix

Replacement mortar is reinstated, making the repair complete.

What are Lichens? Lichen Removal Melbourne | VICRestorations.com

lichen-removal-melbourne-stone-vicrestorations

A slate roof and bluestone parapet laden with lichen.

Want to clean lichen from your roof tiles, brick or stone walls? There are several methods which you can use to help remove the unsightly outbreaks.

The Dry Scrape

By taking the time to remove lichen this way, you can also improve the surface of the stone, tile, brick, or block that is harboring it. Lichen are a mixture of fungus and mould, created by spores and moisture. They can harbor moisture helping to breakdown the stone or masonry surface underneath.

By taking a dull object such as a straight piece of softwood, you can physically dislodge the lichen from the surface of the substrate. The following video shows the movement albeit has a chisel being dragged instead of a piece of timber. The stone in this case was also bluestone which isn’t easily marked. Caution should always be used with soft stone such as slate, marble, sandstone and limestone.

If you have an ornate statue or architectural feature such as an intricate carving, you will want to use other methods in conjunction with a very soft, dry scrape.

The Cocoon
lichen-removal-sculptures-melbourne

Lichen growth shown on a stone monument.

Wrapping a statue up in cling wrap for 3-4 days will help to soften dirt, mould and fungus that may have hardened. After the pollutants have softened, remove the ‘poultice’ and commence using a soft dry scrape method as shown above.

Biocides

Spraying chemicals has its appeal but it also has it’s drawbacks. If not diluted or used properly the typical ammonium-based sprays can cause damage or not work at all.

Wet and Forget

Use a garden sprayer to thoroughly saturate the lichen with a solution of 1 part Wet & Forget Outdoor and 5 parts water. Wait 15 minutes, and spray a second time. This will allow the Wet & Forget Outdoor to penetrate the lichen’s 2 layers. It is best to spray lichen on a day that is not too sunny, to prevent rapid evaporation and to allow Wet & Forget more time to work.  Read more…

Visit vicrestorations.com for further information and to make contact.

Brick Restoration on Ballarat Heritage Terrace — Renovation and Repair

ribbon-pointing-brick-repair-ballarat

Raised Ribbon Pointing replacing older Brick Tuck Pointing on Ballarat Heritage Facade

When comparing traditional ribbon pointing as opposed to brick tuckpointing there are several differentiating factors.

As you can see from the above photo, the heavy oxide mix used on brick tuckpointing (top courses) can actually cause issues if not installed correctly. Mortar, often used in only one colour, is used to smear over the original bedding mortar which is visable where the red coloured mortar has fallen off. This is due to the smear coat method only being several millimetres thick or possibly too brittle to start with. In the instance above, this is definitely the case.

Another issue is that due to oxides’ cementitious effect on the mortar matrix, the mix can often be quite destructive to the 80-100 year old brick. Mortar, as also evident above, is smeared over the brick arris; partially covering the face. In tension, this can snap corners off and even break bricks clean in half–especially old, soft brick.

The biggest comparison, besides appearance, is that the traditional ribbon technique will protect the brick, whilst at the same time, provide depth and definition to the masonry facade. Standard tuckpoint can last quite a while but as opposed to the deeper ribbon pointing, the facade will age better and can last a lot longer.

brick-tuckpointing-melbourne-facade

Brick Tuckpointing, before and after lime putty ribbon