Repairs made on a Heritage Sydney Sandstone Front Fence. 20 years old and still looking great!
After many years of specialising in Stone Masonry and Repair, melbournebrickrepair.com can service your Sandstone like few others.
Repointing, Carving (Banker Work), Specialised Indents and Facade Restoration is somewhat of a rarity. We want that to be no longer the case.
Are you a builder or contractor and need heritage stone consultation? We can help show you the traditional methods of stone carving, indents, design traditional mortar mixes via agreement.
Want to clean lichen from your roof tiles, brick or stone walls? There are several methods which you can use to help remove the unsightly outbreaks.
The Dry Scrape
By taking the time to remove lichen this way, you can also improve the surface of the stone, tile, brick, or block that is harboring it. Lichen are a mixture of fungus and mould, created by spores and moisture. They can harbor moisture helping to breakdown the stone or masonry surface underneath.
By taking a dull object such as a straight piece of softwood, you can physically dislodge the lichen from the surface of the substrate. The following video shows the movement albeit has a chisel being dragged instead of a piece of timber. The stone in this case was also bluestone which isn’t easily marked. Caution should always be used with soft stone such as slate, marble, sandstone and limestone.
If you have an ornate statue or architectural feature such as an intricate carving, you will want to use other methods in conjunction with a very soft, dry scrape.
Wrapping a statue up in cling wrap for 3-4 days will help to soften dirt, mould and fungus that may have hardened. After the pollutants have softened, remove the ‘poultice’ and commence using a soft dry scrape method as shown above.
Spraying chemicals has its appeal but it also has it’s drawbacks. If not diluted or used properly the typical ammonium-based sprays can cause damage or not work at all.
Wet and Forget
Use a garden sprayer to thoroughly saturate the lichen with a solution of 1 part Wet & Forget Outdoor and 5 parts water. Wait 15 minutes, and spray a second time. This will allow the Wet & Forget Outdoor to penetrate the lichen’s 2 layers. It is best to spray lichen on a day that is not too sunny, to prevent rapid evaporation and to allow Wet & Forget more time to work. Read more…
Visit vicrestorations.com for further information and to make contact.