Raised Ribbon Pointing replacing older Brick Tuck Pointing on Ballarat Heritage Facade
When comparing traditional ribbon pointing as opposed to brick tuckpointing there are several differentiating factors.
As you can see from the above photo, the heavy oxide mix used on brick tuckpointing (top courses) can actually cause issues if not installed correctly. Mortar, often used in only one colour, is used to smear over the original bedding mortar which is visable where the red coloured mortar has fallen off. This is due to the smear coat method only being several millimetres thick or possibly too brittle to start with. In the instance above, this is definitely the case.
Another issue is that due to oxides’ cementitious effect on the mortar matrix, the mix can often be quite destructive to the 80-100 year old brick. Mortar, as also evident above, is smeared over the brick arris; partially covering the face. In tension, this can snap corners off and even break bricks clean in half–especially old, soft brick.
The biggest comparison, besides appearance, is that the traditional ribbon technique will protect the brick, whilst at the same time, provide depth and definition to the masonry facade. Standard tuckpoint can last quite a while but as opposed to the deeper ribbon pointing, the facade will age better and can last a lot longer.
Brick Tuckpointing, before and after lime putty ribbon
Looking for a certain type of heritage brick? Need an art deco ‘double, half-round’ capping brick or some ornately patterned finishes? We can replicate and match missing or discontinued bricks for your heritage/ federation/ victorian/ colonial styled period home renovation. Simply send us a photo with some dimensions and we can replicate from that.
A Patterned, Glazed 60mm Brick from Yesteryear.
Some bricks are notoriously hard to replace, we can help.
Ribbon Pointing on Victorian Bluestone Cottage
Much care is taken in replacing the old mortar. In this case, the mortar removed was from the original construction from over 150 years ago! The lime based mortar has been replicated with the addition of grey cement.
Bluestone Cottage Restoration, Regional Victoria
Re-pointing ribbon pointing for cottage restoration
The following, true to traditional building style, is the back wall to the same building. The more dressed stones were selected and used for the front walls, as pictured above, with the offcuts and more random pieces used to construct the rear half of the house. Replacing and repairing the mortar on this bluestone cottage was long over due with the bottom image showing the difference of new, left, to old, right.
Mortar pointing/ jointing, for brick and stone buildings should be re-pointed every 30-50 years depending on exposure. Of course, a more hastened maintenance schedule, for aesthetic benefit, can be used and may be beneficial.
Always embossed in Georgian design, Bluestone window lintol, quions (and sill) with extended ribbon pointing to accentuate the rebate.
The above limestone is from WA. The important thing to remember when working with soft types of limestone such as this is to reinforce any overhead arch to provide extra support. The neutral colours of the stone facade and fence balance well with strong blacks or dark greys.
Whilst being involved with a major Melbourne Heritage Building Company, G.H. Veitch Stonemasons assisted with the facade restoration carried out in 2012 on the fantastic French-provinical-styled GPO in Melbourne CBD.
Indent -Tympanum Cap & Ledge
Let us carve your new external facade architectural stone features in Sandstone, Bluestone or Limestone