Noticing the presence of mold/ fungus on your walls inside your house, dampness on your cornices and floor coverings such as rugs or carpet? Odds are, whether you are living in an older house or not, if the dampness is located down the bottom of your internal walls or on your floor/ coverings, you are experiencing the effects of rising damp.
No amount of additional air movement inside your house will prevent and minimise the effects of rising damp.
From the ground up, you will need to repair soft brick which hold additional moisture, replace and reinstate any defective, soft or missing mortar in between the brick and install a permanent barrier to lower the effects of water rising up the wall and into your floorboards and internal plaster wall linings.
Also, increasing airflow under your house will help to prevent excess amounts of moisture and the consequences encountered. Subfloor ventilation in the way of ‘passive’ air vents or ‘active’ motorised fans can help keep the air moving.
Soft brick being replaced on an Art Deco 1920-30 build located in Reservoir, north of Melbourne
The above photo indicates the process of removing soft brick that is a so commonly experienced from rising damp.
Whilst repointing will help to prevent water ingress into the wall and internal cavity, without replacing soft brick, your wall will still be harbouring moisture. The only way to remove this issue, is to replace the brick. Rendering soft brick can sometimes have a detrimental effect as the mortar used to patch the brick can also harbour moisture if not installed properly.
All clay bricks will deteriorate. This is inevitable. And as such, maintenance of your brick house cladding will be ongoing into the future. Stay on top of it and contact melbournebrickrepair.com for further information.
Our crack repair service, shown here on a front heritage Victorian-era double fronted terrace, is amongst the best in the repair and renovation industry. For brick walls that have moved as a result of needing foundation repair (underpinning) or structures that recently have been underpinned, contact melbournebrickrepair.com
Our methods to repair render, cracked and soft brick are just as important when featured on painted walls.
No matter what type of finish is required, we can help you…
repair, restore and renovate | melbourne brick repair
Repointing is a skill. We replicate and match various existing mortar finishes.
With salts permeating through this subfloor structure located in Brighton, VIC, it was apparent that there was something very wrong.
Efflorescence, aka salt attack is a calcium chloride/ zinc chloride build up caused through moisture in the subfloor or rising damp from subfoundation soil.
When viewed from behind the wall, the salt attack was much worse; formations of hygroscopic gel and rust was evident.
Through constant hygroscopic moisture (airborne) contained in the subfloor area, and the lack of ventilation, the damage to the bricks is inevitable.
Ideally, repairs should occur at a time prior to the state of deterioration as indicated.
Contact melbournebrickrepair.com for further information on subfloor conditions.
After we knock out the joints, the replacement material will be placed and shaped to create what is known as ribbon pointing. The idea of ribbon pointing is to effectively ‘flatten’ the wall.
the balance that this will create will be surprising and should come up really well. More to come…